Monday, March 23, 2009

Singlemode/Multimode Simplex/Duplex Fiber Cable

10 Pair LSA Highband Module[Manufacturer/Exporter] 1).Superior high speed data and voice cross connect modules 2).Available in 8 pair and 10 pair disconnection versions, which enable high LAN and WAN systems maximum headroom in transmission performance.
8 Pair Disconnection Highband Module[Manufacturer/Exporter] 1).Superior high speed data and voice cross connect modules 2).Available in 8 pair and 10 pair disconnection versions, which enable high LAN and WAN systems maximum headroom in transmission performance.
New LSA PLUS Highband 2M Bit Module[Manufacturer/Exporter] Description Weight/Pack Pack LSA PROFIL disconnection module 2/8 x abs 0.800 kg 10 pieces without contact connector, so that the shield is not automatically earthed. LSA-PLUS disconnection module for applications in high datarate transmission s
LSA PLUS Highband Disconnection Module(2M Bit)Old Item[Manufacturer/Exporter] Description Weight/Pack Pack LSA PROFIL disconnection module 2/8 x abs 0.800 kg 10 pieces without contact connector, so that the shield is not automatically earthed. LSA-PLUS disconnection module for applications in high datarate transmission system
10 Pair Highband Module With Wire Guide Full Grey Color[Manufacturer/Exporter] 1).Superior high speed data and voice cross connect modules 2).Available in 8 pair and 10 pair disconnection versions, which enable high LAN and WAN systems maximum headroom in transmission performance.
20 Pair LSA PLUS Highband Connection Module[Manufacturer/Exporter] 1).Superior high speed data and voice cross connect modules 2).Available in 20 pair connection versions, which enable high LAN and WAN systems maximum headroom in transmission performance. 3)20 Pair Connection Mode.Provide contacts for bronze part.
PCB IDC For LSA PLUS[Manufacturer/Exporter] WT-1013-02 2 PIN PITCH:3.81MM WT-1013-03 3 PIN PITCH:3.81MM WT-1013-04 4 PIN PITCH:3.81MM WT-1013-05 5 PIN PITCH:3.81MM WT-1013-06 6 PIN PITCH:3.81MM WT-1013-07 7 PIN PITCH:3.81MM WT-1013-08 8 PIN PITCH:3.81MM WT-10
LSA Disconnection Module 2/10[Manufacturer/Exporter] LSA-PLUS disconnection module 2/10 with additional screw terminals on the jumper side, 20-pole, with a width of 36 mm, the module occupies two module slots in the back-mount frame.
25 Pair Feed Through Module[Manufacturer/Exporter] 25 Pair, High Density Module The FT Module is a two piece assembly, consisting of a base and a connector. The module may be used in a variety of applications, but is especially suited for BD and FD cross-connect fields where high density terminati
25 PAir Profile Frame For Feed Through Module[Manufacturer/Exporter] 1.CW1014-200:200 Pair 245*169*58mm 2.CW1014-250:250 Pair 295*169*158 3.CW1014-300:300 Pair 345*169*58mm 4.CW1014-350:350 Pair Also 400,450,500,600,800 Pair
5 Pair Feed Through Module[Manufacturer/Exporter] 1) FT module is a two piece assembly consisting of a base and a connector, it allows high-density termination in a small area 2) The designed of this module provides a compact, faster installation 3) Simply terminate the cables, remove the connec
Single Pair Protection Unit(Compact Single Pair)[Manufacturer/Exporter] TECHINICAL PARAMETERS The upper-limit of voltage for over-voltage protection: a. 260 voltage rising rate 100kv/s b. 400 voltage rising rate 1 kv/s The lower-limit of limit voltage for over-voltage protection :190V The bearing capability of surge cur
2 Pole Protection Magazine[Manufacturer/Exporter] WT-1033-10:10 PAIR WITHOUT ARRESTER CW-1033-10W:10 PAIR WITH 230V ARRESTER CW-1033-08: 8 PAIR WITHOUT ARRESTER CW-1033-08W:8 PAIR WITH 230V ARRESTER CW-1033-05:5 PAIR WITHOUT ARRESTER WT-1033-05W:5 PAIR WITH 230V ARRESTER
3 Pole Protection Magazine[Manufacturer/Exporter] CW-1034-10:10 PAIR WITHOUT ARRESTER CW-1034-10W:10 PAIR WITH 230V ARRESTER CW-1034-08: 8 PAIR WITHOUT ARRESTER CW-1034-08W:8 PAIR WITH 230V ARRESTER CW-1034-05:5 PAIR WITHOUT ARRESTER CW-1034-05W:5 PAIR WITH 230V ARRESTER
10 Pair Feed Through Module[Manufacturer/Exporter] Features: 1) FT module is a two piece assembly consisting of a base and a connector, it allows high-density termination in a small area 2) The designed of this module provides a compact, faster installation 3) Simply terminate the cables, remov
Singlemode/Multimode Simplex/Duplex Fiber Cable[Manufacturer/Exporter] Cable mode code cotlsists of five parts, which are listed bellow. Each part is r [Manufacturer/Exporter] ◆ Symbols for classification GY------------------ optical fiber telecommunication cables for outdoor. ◆ Strength member code Strength member
Single Pair Arrester Protection Plug,OverVoltage and OverCur[Manufacturer/Exporter] it's used for the 10 pair disconnection module, provide overvoltage and overcurrent protection for the module, Gas Discharge Tube 230V,350V availabel,PTC Provide OverCurrent protection
10 Pair Disconnection Module,10 Pair Telecom Connection stri[Manufacturer/Exporter] 10 pair disconnection module,copper contacts,silver plating, used in main distribution frames.
MDF Splitters,MDF Splitters china manufacturer[Manufacturer/Exporter] Jointly with MDF manufacturers, CoreLogic has developed various types of MDF xDSL splitters. Splitter frame asymblies are also available for your request.
Rack Mount ADSL Splitter,19 inch ADSL Splitter Shelf[Manufacturer/Exporter] To reach the bit rates promised by the latest DSL technologies and minimize the impact of loop problems, CoreLogic has developed a full range of high performance Central Office splitters. These are available in a wide variety of impedance and functio
ADSL Splitter,ADSL Filter, ADSL Splitter ADSL Filter China M[Manufacturer/Exporter] ADSL Micro Filter,ADSL Micro Splitter,China ADSL Micro Splitter,China ADSL Micro Filter Good function in separating voice low-frequency signal from ADSL high-frequency signal Makes internet and telephone to be functional at the same time OEM/ODM
Sell:Cellphone OEM Li-ion Battery[Manufacturer/Exporter] Cellphone OEM Li-ion Battery
China sell:lg LCD,Housing,Keypad,Flex Cable,Antenna.[Manufacturer/Exporter] China sell:lg LCD,Housing,Keypad,Flex Cable,Antenna.
SELL:Mobile phone USB Data Cables[Manufacturer/Exporter] SELL:Mobile phone USB Data Cables
Sell moible phone Bluetooth Headset[Manufacturer/Exporter] moible phone Bluetooth Headset
SELL:Keypad Button(OEM)>> Keypad[Manufacturer/Exporter] Keypad Button(OEM)>> Keypad
SELL:Sonyericsson ,Nokia,Motorola,Samsung,NEC,Audiovox Housi[Manufacturer/Exporter] SELL:Sonyericsson ,Nokia,Motorola,Samsung,NEC,Audiovox Housing(OEM)

10 pair Label Holder

Cat5e/Cat6 Kestone Jacks[Manufacturer/Exporter] The Computer Cable Store's Category 5e (CAT5e) 180° Keystone Jacks are available in a variety of five different colors intended to assist in the task of identification. The design of our CAT5e Keystone Jacks provide excellent performance that meets
Cat5e Patch Panels,Cat 5e RJ45 UTP FTP Patch Panels[Manufacturer/Exporter] Network Patch Panels,RJ45 Patch Panels,Cat5e Patch Panels,China Patch Panels,Avaya Patch Panels,AMP Patch Panels,Panduit Patch Panels,Modular Patch Panels,Enhanced Cat5 Patch Panels,Cat5e UTP Patch Panels,Enhanced Category5 Patch Panels
40 Pair Metal Distribution Cabinet[Manufacturer/Exporter] 1)The series connection boxes offer increased pair capacity while maintaining an industry footprint. 2)The stainless steel backmount frame verticals support Krone type IDC strip giving a nomal capacity of 340,680 or 1020pair depending on the model.
80 Pair Metal Cabinet Outside[Manufacturer/Exporter] 1)The series connection boxes offer increased pair capacity while maintaining an industry footprint. 2)The stainless steel backmount frame verticals support Krone type IDC strip giving a nomal capacity of 340,680 or 1020pair depending on the model.
120 Pair Main Distribution Box(Cabinet)[Manufacturer/Exporter] )The series connection boxes offer increased pair capacity while maintaining an industry footprint. 2)The stainless steel backmount frame verticals support Krone type IDC strip giving a nomal capacity of 340,680 or 1020pair depending on the model.
Standing Server Cabinet[Manufacturer/Exporter] The Standing Server Cabinet is a cost effective cabinet that can be installed in equipment rooms or in office environments where aesthetics are important. Exquisite Design with precise dimension and craftmanship ; Welded frame with the standed carry
British Standing Server Cabinet[Manufacturer/Exporter] The GB Standing Server Cabinet is a cost effective cabinet that can be installed in equipment rooms or in office environments where aesthetics are important .The frame made from comes with steel side, top and rear door plus a toughened glass front d
BT Standarder Standing Cabinet[Manufacturer/Exporter] The GB Standing Server Cabinet is a cost effective cabinet that can be installed in equipment rooms or in office environments where aesthetics are important. MATERIALS: SPCC high-quality cold roll steel. Surface Treatment: Degreasing, rustproof, phos
GMA Wall Mount Cabinet[Manufacturer/Exporter] GMA Wall Mount Cabinets Wall mount cabinets rigid frame structure with load rating of 60 Kg , cable entry from top and bottom, front section with glass door keys and locks, quickly removable side panels, provision for optional lock, construction fr
Wall Mount Cabinet[Manufacturer/Exporter] Wall Mounted Cabinets ( TWO SECTIONS : 450+100 ) The double section provides an easy access to the cabinet to the rear of all mounted cabinets. A swing frame construction adds to the flexibility of operation and maintenance. Features Variety of h
Wall Mount Cabinet TypeC[Manufacturer/Exporter] Cabinet WallMountCabinetTypeC( Order )( Search ) MATERIALS: SPCC cold roll steel. Surface Treatment: Deareasing , rustproof, phosphoric Spraying. Exquisite design with precise dimension and craftsmanship. Tempered glass front door. Installation
Copper Connectivity OSP Cabinet[Manufacturer/Exporter] The cabinet 82 could be used as a distribution box for copper and FO cables.q This cabinet, made of fibre-reinforced polycarbonate, is available with or without ventilation, depending on the particular type of application. q The door comes with a d
New Insertion Tools For LSA Module[Manufacturer/Exporter] 1)Insertion Tools For Krone Module(Disconnection Module&Connection Module) 2)IDC&LSA Tech. 3)Insert the Cable to the Module Much easier 4)We also have other types of Krone Tools
Number Flags For Module[Manufacturer/Exporter] 801 CW1027 (10PairLabelHolderWithDustCover) Accessaries For Module Order 800 CW1029A-10 (10PairProfileLabelHolder) Accessaries For Module Order 782 CW1026 (DoubleFaceHingedLabelHolderGreyColor) Accessaries For Module Order 781 CW1025 (JumperRing) Ac
8&10 Pair Disconnection Plug With Grey Color[Manufacturer/Exporter] 801 CW1027 (10PairLabelHolderWithDustCover) Accessaries For Module Order 800 CW1029A-10 (10PairProfileLabelHolder) Accessaries For Module Order 782 CW1026 (DoubleFaceHingedLabelHolderGreyColor) Accessaries For Module Order 781 CW1025 (JumperRing) Ac
1 Pair Disconnection Plug,Dummy Plug[Manufacturer/Exporter] 801 CW1027 (10PairLabelHolderWithDustCover) Accessaries For Module Order 800 CW1029A-10 (10PairProfileLabelHolder) Accessaries For Module Order 782 CW1026 (DoubleFaceHingedLabelHolderGreyColor) Accessaries For Module Order 781 CW1025 (JumperRing) Ac
1 Pair Marking Cap[Manufacturer/Exporter] 801 CW1027 (10PairLabelHolderWithDustCover) Accessaries For Module Order 800 CW1029A-10 (10PairProfileLabelHolder) Accessaries For Module Order 782 CW1026 (DoubleFaceHingedLabelHolderGreyColor) Accessaries For Module Order 781 CW1025 (JumperRing) Ac
Earth Bar For Modules[Manufacturer/Exporter] WT-1024-10:FOR 10 PAIR WT-1024-8: FOR 8 PAIR SPECIFICATIONS: Thickness of Ni and Silver Plating Could Be Changeable
Double Face Hinged Label Holder Grey Color[Manufacturer/Exporter] 801 CW1027 (10PairLabelHolderWithDustCover) Accessaries For Module Order 800 CW1029A-10 (10PairProfileLabelHolder) Accessaries For Module Order 782 CW1026 (DoubleFaceHingedLabelHolderGreyColor) Accessaries For Module Order 781 CW1025 (JumperRing) Ac
10 Pair Profile Label Holder[Manufacturer/Exporter] With label blank Label size: 95 x 18 mm or 75 x 18 mm Requires the space of one connection module in the back-mount frame / profile rod system
10 Pair Label Holder With Dust Cover[Manufacturer/Exporter] 801 CW1027 (10PairLabelHolderWithDustCover) Accessaries For Module Order 800 CW1029A-10 (10PairProfileLabelHolder) Accessaries For Module Order 782 CW1026 (DoubleFaceHingedLabelHolderGreyColor) Accessaries For Module Order 781 CW1025 (JumperRing) Ac
Hinged Label Holder[Manufacturer/Exporter] WT-1030A-05: 5 pair surface mount label holder WT-1030B-05: 5 pair hinged label holder WT-1030-08: 8 pair hinged label holder WT-1030-10: 10 pair hinged label holder
Test Plug Without Cable[Manufacturer/Exporter] CW-1031-02:2 Pole Test Plug Kit CW-1031-04:4 Pole Test Plug Kid
Test Cord With Alligator Clips[Manufacturer/Exporter] We sell 2 pole test kit,4 pole test kid. 2 Pole Test Plug 4 Pole Test Plug
Test Cord Plug to Banana Clips[Manufacturer/Exporter] We sell 2 pole test kit,4 pole test kid. 2 Pole Test Plug-CW1031D-02 4 Pole Test Plug-Cw1031D-04
Label Holder and Dust Cover For LSA Module[Manufacturer/Exporter] 1).10 Pair Label Holder Designed 10 pair connection module&disconnection module. 2).We also provide 5 Pair,8 Pair Label Holder With Dust Cover 3).ABS or PBT Material
10 Pair Label Holder[Manufacturer/Exporter] 828 CW1029-08 (8PairLabelHolder) Accessaries For Module Order 827 CW1029B-10 (10PairLabelHolder) Accessaries For Module Order 824 CW-ASEM02 (LabelHolderandDustCoverForLSAModule) Accessaries For Module Order 806 CW1031D (TestCordPlugtoBananaClips) Ac

48 Port Patch Panel

8 Pair Label Holder[Manufacturer/Exporter] 828 CW1029-08 (8PairLabelHolder) Accessaries For Module Order 827 CW1029B-10 (10PairLabelHolder) Accessaries For Module Order 824 CW-ASEM02 (LabelHolderandDustCoverForLSAModule) Accessaries For Module Order 806 CW1031D (TestCordPlugtoBananaClips) Ac
UK Style Face Plate[Manufacturer/Exporter] WT-2002A: single port 86mm x 86mm WT-2002B: double port 86mm x 86mm WT-2002C: 86mm x 146mm
80*80mm Face Plate Back Box UK Style[Manufacturer/Exporter] WT-2004A:80mm x 80mmdepth:42mm WT-2004B: 86mm x 86mmdepth:35mm
Face Plate UK Style[Manufacturer/Exporter] WT-2003A: single port 86mm x 86mm WT-2003B: double port 86mm x 86mm
Face Plate French Style[Manufacturer/Exporter] WT-2005A: single port 80mm x 80mm WT-2005B: double port 80mm x 80mm 794 CW2011A.B. (BlankBracket) Network RJ45 FacePlate Order 793 CW2010A.B (ST45Bracket) Network RJ45 FacePlate Order 792 CW2009B (KeystoneJackBracketWithoutLAbel) Network RJ45 FacePl
80*80mm Face Plate Back Box French Style[Manufacturer/Exporter] WT-2006A: single port 80mm x 80mm WT-2006B: double port 80mm x 80mm
Face Plate For Keystone Jack(70mm*155mm)US Type[Manufacturer/Exporter] WT-2008A: single port WT-2008B: double port
Cat5e Modular Keystone Jack Bracket With Label For UK Style[Manufacturer/Exporter] WT-2009A: 25mm x 50mm
Keystone Jack Bracket Without LAbel[Manufacturer/Exporter] 794 CW2011A.B. (BlankBracket) Network RJ45 FacePlate Order 793 CW2010A.B (ST45Bracket) Network RJ45 FacePlate Order 792 CW2009B (KeystoneJackBracketWithoutLAbel) Network RJ45 FacePlate Order 791 CW2009A (Cat5eModularKeystoneJackBracketWithLabelForUK
Blank Bracket[Manufacturer/Exporter] WT-2011A: 1 outlet for ST WT-2011B: 2 outlet for ST WT-2011C: blank bracket WT-2011D: 2 outlet for keystone jack
Blank Bracket[Manufacturer/Exporter] 973 CW2121 (SinglePortFacePlates) Network RJ45 FacePlate Order 972 CW2120 (2PortsFacePlates) Network RJ45 FacePlate Order 971 CW2119 (FacePlates) Network RJ45 FacePlate Order 970 CW2018 (KeystoneJackFaceplates,4PortsAngledFaceplates) Network RJ45 Fa
Category5e Surface Mount Box[Manufacturer/Exporter] WT-2013A: 1 port WT-2013B: 2 port
Multiple Surface Box[Manufacturer/Exporter] WT-2014A: Single sip box WT-2014B: Triple sip box WT-2014C: Double sip box
Keystone Jack Faceplates,2 Ports Angled Faceplates[Manufacturer/Exporter] Keystone Jack Faceplate/angled Faceplate Description: Multi-port Information Keystone Outlet provides a quick snap in/out feature that enables you to change or add keystone modules easily to meet any system requirement, improving the efficiency
Keystone Jack Faceplates,4 Ports Angled Faceplates[Manufacturer/Exporter] Multi-port Information Keystone Outlet provides a quick snap in/out feature that enables you to change or add keystone modules easily to meet any system requirement, improving the efficiency of on site installations and maintenance. Variety of icon
FacePlates[Manufacturer/Exporter] FacePlate,Facaplate,Single Gang FacePlate 1,2,3,4,6 Ports Single gang faceplate with one, two, four and six port configurations support the use of STAR600 modules as well as all other SpeedStar and FlexPlate jack modules.
2 Ports FacePlates[Manufacturer/Exporter] FacePlate,Facaplate,Single Gang FacePlate 1,2,3,4,6 Ports Single gang faceplate with one, two, four and six port configurations support the use of STAR600 modules as well as all other SpeedStar and FlexPlate jack modules.
Single Port FacePlates[Manufacturer/Exporter] FacePlate,Facaplate,Single Gang FacePlate 1,2,3,4,6 Ports Single gang faceplate with one, two, four and six port configurations support the use of STAR600 modules as well as all other SpeedStar and FlexPlate jack modules.
12 Port 19 Inch Patch Panel[Manufacturer/Exporter] 19" Patch panel Feature of Patch Panels : 1) Adopt Snap-in way to install; Its module disposition has higher flexibility and suitability ; The window of the label is furnished with removable label one, help users manage. 2) Movable contact
6 Port Patch Panel[Manufacturer/Exporter] 1、Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the same or
12 Port Patch Panel[Manufacturer/Exporter] 1、Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the same
18 Port Patch Panel[Manufacturer/Exporter] 1、Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the same or
Shielded Patch Panel[Manufacturer/Exporter] 1、Available from 6 ports to 96 ports 2、Designed and produced accordint to the ISO / IEC 11801 and EIA / TIA-568B standards 3、19" rack or wall mountable 8-pin modular jack panel that accommodates repeated line moves, additions and rea
24 Port Shielded Patch Panel[Manufacturer/Exporter] 1、Available from 6 ports to 96 ports 2、Designed and produced accordint to the ISO / IEC 11801 and EIA / TIA-568B standards 3、19" rack or wall mountable 8-pin modular jack panel that accommodates repeated line moves, additions and r
48 Port Patch Panel[Manufacturer/Exporter] 1、Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the same
24 Port Cat5e Patch Panel With Cable Management[Manufacturer/Exporter] 1、 Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the same or
48 Port Cat5e Patch Panel With Cable Management[Manufacturer/Exporter] 1、Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the same

24 Port Patch Panel

24 Port Cat6 Patch Panel With Cable Management[Manufacturer/Exporter] 1、 Nickel coated tin-copper IDC wire post,aviable cable diameter isΦ0.4~0.6mm 2、Reed Connection durability: the same or more than 250 times 3、Contact resistance: the same or less than 2.5MΩ 4、Insulation resistance: the sam
50 Port Telephone Cat3 Patch Panel[Manufacturer/Exporter] 19" / 1 HU 50 x RJ45 50 unshielded RJ45 sockets cable connection from backside LSA-Module (allocation 3 / 4 / 5 / 6) wire channel earthing screw color is light grey, code Ral7035 fixing set for 19" unit
25 Port Telephone Cat3 Patch Panel[Manufacturer/Exporter] 19" / 1 HU 25 x RJ45 25 unshielded sockets cable connection from backside LSA-Modules (allocation 3 / 4 / 5 / 6) wire channel earthing screw color is light grey, code Ral7035 fixing set for 19" unit
24 Port Top Link Cat5e Patch Panel[Manufacturer/Exporter] 19" / 1 HU 24 x RJ45 24 shielded sockets cable connection from backside 8 pin LSA-Module color is light grey ,code Ral7035 fixing set for 19" unit shielded cable binder for 360° contact shield
8 Port Top Link Cat5e Patch Panel[Manufacturer/Exporter] table unit 8 x RJ45 8 shielded sockets cable connection from backside of 8 pin LSA-Module color is light grey, code is Ral7035
Cat5,Cat5e,Cat6 UTP FTP Patch Cord[Manufacturer/Exporter] A multipair (usually 4 pair) high performance patch cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the patch cable a certain amount of immunity from the infiltration of unwante
24 Port Modular Network Patch Panels,24 Port UTP Modular Pat[Manufacturer/Exporter] High Density Modular Insert Patch Panel Compatible with CAT6 mini horizontal keystone jacks, shielded and unshielded (JCK-6-HM and JCK-6-HM-SHLD). Fits 24 ports in 1RU of rack space. Designed to fit in a standard 19" rack/cabinet. Includes cable
48 Port Modular Network Patch Panels,48 Port UTP Modular Pat[Manufacturer/Exporter] CAT6 Modular Patch Panel RJ45 female ports on front - 110 type wire termination blocks on back. Compatible with 23 - 24 AWG solid conductor UTP cable. Available in 12 to 32 ports. Designed to fit in a standard 19" rack/cabinet. 12, 16 & 24 port
48 Port UTP Patch Panels,48 Port Cat5e Patch Panels[Manufacturer/Exporter] Space saving, high-density 1U (24 Port) or 2U (48 Port), 19-inch panel design Designed to mount to any standard 19in Rack or Cabinet 50?gold-plated contacts Black electrostatic powder-coated steel Accommodates top, bottom or side cable entry
Essential Low Cost Punch Down STP Cat5e Patch Panels[Manufacturer/Exporter] Low Cost Punch Down UTP Cat5e Panels" Low cost range of patch panels from one of the world's largest manufacturers of structured cabling systems. Clear label holders are positioned over the ports. Part numbers 424.510 and 424.511 are without rear
24 Port PS5e High Density Patch Panels[Manufacturer/Exporter] CW 1200 System GigaFlex PS5e HD Category 5e Unshielded Patch Panels - Black The PS5E high density patch panel series are an integral part of each CW System 1200 installation. Available in a choice of 24 and 48 port density, each panel is robust and
48 Port PS5e High Density Patch Panels[Manufacturer/Exporter] CW 1200 System GigaFlex PS5e HD Category 5e Unshielded Patch Panels - Black The PS5E high density patch panel series are an integral part of each CW System 1200 installation. Available in a choice of 24 and 48 port density, each panel is robust and
110 Patch Plug[Manufacturer/Exporter] CW-1042A-01 CW-1042A-02 CW-1042A-04
110 Patch Cord[Manufacturer/Exporter] CW-1042B-01 CW-1042B-02 CW-1042B-04
110 Cable Management[Manufacturer/Exporter] 1044A: 110cable management with leg 1044B: without leg
110 Cable Management[Manufacturer/Exporter]
110 Cable Management For 19 Inch Cabinet[Manufacturer/Exporter] Features: 1) Designed for 19 inch cabinets 2) Used for cable management 3) We also produce 110 wiring block, 110 cable management, 110 cross connection panels for 19 inch cabinets, 110 patch cords, 110 patch plugs, 110 PCB IDC connectors, and 1
110 Cross Connection Panel For 19 Inch Cabinet[Manufacturer/Exporter] Specifications: 1) Be available for both with-legs and without-legs 2) Provided 50, 100 and 300 pairs 3) With-legs, steel frame is easy to assemble 4) Cables punch down easily using standard 110-style punch-down tools 5) Jacks fit standard rj
110A Blocks and 110 Distribution Rings[Manufacturer/Exporter] 110A Block and 110 Distribution Ring The Systimax 110 Distribution Ring is a moulded plastic attachment which clips on to either side of the 110A Wiring Block. It functions as a vertical patch cord or jumper organizer.
110 Jumper Through,110 Cable Management[Manufacturer/Exporter] The 110 Jumper Trough is a white, fire-retardant, moulded plastic frame which is placed between each 100-pair wiring block and at the top of each column of 110 blocks. It serves as a horizontal trough for the routing of patch cords and cross-connect
1100D Patch Cord Organizers,110 Patch Cord Organizers[Manufacturer/Exporter] The 1100D Patch Cord Organizers are used for routing patch cords in 19 inch rack mount RJ45 Jack Panel installations. 1100D Patch Cord Organizers,110 Patch Cord Organizers,110 Cable Organizers
110 Termination Patch Panels,110 Patch Panels[Manufacturer/Exporter] Cables To Go's Cat5e Patch Panels provide optimum performance, interfacing multi-vendor equipment. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 CAT5e connecting hardware specifications. The clear numbering o
110 Patch Panel Systems,110 Wiring Cable Systems[Manufacturer/Exporter] 1).The 110 Patch Panel System Backboard (bottom picture) is a metal panel equipped with distributing rings that provide the vertical paths for running patch cords or jumpers between 110 Patch Panel System Terminal Blocks. 2).The 188D3 is used with
Fiber Optic Distribution Box,Termination Distribution Box[Manufacturer/Exporter] Description: Optic distribution box specially suitable for termination office in optical access network ,realize the intention of slack atorage and direct through. Features: 1).Splicing slack storage and distribution. 2).Front and side doors structu
12P Fiber Optic Connection and Distribution Module[Manufacturer/Exporter] Features: 1) Designed for ODF system 2) Many types available The Fusing Distribution Board is double side structure,integrating the fusing and distribution into one unity,suitable for ribbon or non-ribbon optical fiber cable. Every board can be
12P Fiber Optic Connection and Distribution Module[Manufacturer/Exporter] 770 CW3009 (FiberOpticSpliceEnclosure) Fiber Optic Distribution Order 769 CW3008 (OpticalFiberCableConnectionBox) Fiber Optic Distribution Order 768 CW3007 (AccessariesForFiberOpticConnectionModule) Fiber Optic Distribution Order 767 CW3006 (24PFibe
24P Fiber Optical Connection Module[Manufacturer/Exporter] 770 CW3009 (FiberOpticSpliceEnclosure) Fiber Optic Distribution Order 769 CW3008 (OpticalFiberCableConnectionBox) Fiber Optic Distribution Order 768 CW3007 (AccessariesForFiberOpticConnectionModule) Fiber Optic Distribution Order 767 CW3006 (24PFibe

MDF Terminal Blocks

24P Fiber Optical Connection Module[Manufacturer/Exporter] 770 CW3009 (FiberOpticSpliceEnclosure) Fiber Optic Distribution Order 769 CW3008 (OpticalFiberCableConnectionBox) Fiber Optic Distribution Order 768 CW3007 (AccessariesForFiberOpticConnectionModule) Fiber Optic Distribution Order 767 CW3006 (24PFibe
Accessaries For Fiber Optic Connection Module[Manufacturer/Exporter] 770 CW3009 (FiberOpticSpliceEnclosure) Fiber Optic Distribution Order 769 CW3008 (OpticalFiberCableConnectionBox) Fiber Optic Distribution Order 768 CW3007 (AccessariesForFiberOpticConnectionModule) Fiber Optic Distribution Order 767 CW3006 (24PFibe
Optical Fiber Cable Connection Box[Manufacturer/Exporter] PRODUCT SUMMARY GP30 Connection Box is designed in accordance with national standards of communication line.The outer shell is made of high-quality stainless steel or engineering plastic.It's suitable for the direct-passing and branch connecting of
Distribution Frame For 19 Inch Cabinet[Manufacturer/Exporter] 910 CWFO024 (RackMountPatchPanel) Fiber Optic Distribution Order 909 CWFO023 (FiberOpticPatchCord) Fiber Optic Distribution Order 895 CW08-2 (CW08-2FiberOpticSpliceClosure) Fiber Optic Distribution Order 894 CW08-A (CW08-AFiberOpticSpliceClosure) Fi
Fiber Optic Distribution Case[Manufacturer/Exporter] Accessories for Whole Set: 1.ODF Body 2.FC/PC Adapter Pre-Installed 3.FC/PC Pigtail 1.5m Pre-Installed 4.24 Coil Splicing Tray,Pre-Installed 5.50mm Fiber Optical Protection Tube For Melt Connection 6.Clamp For Cable Binding 7.M6 Screw For Rack
Fiber Optic Patch Cord[Manufacturer/Exporter] Features: ·Superior quality standard PC/UPC/APC polishing ·100% Optic test (Insertion Loss & Return Loss) ·0.9mm, 2.0mm and 3.0mm cable optional ·Comply to IEC Standard Specifications: Optical performance Measurement parameter Singlemo
Rack Mount Patch Panel[Manufacturer/Exporter] 1).These rack mount cabinets will accommodate up to 144 terminations and come complete with front and rear cable management fixtures installed, and front, rear, and side entry/exit holes. 2).RPP series cabinets are designed with built in cable manag
Rack Mount Fiber Termination Boxes[Manufacturer/Exporter] Black rack mount front access patch and splice enclosure with an integrated swing out tray for accessing connectors and splices. Supports up to 2 Standard MultiLiteTM Adapter Panels with 6, 8 or 12 fiber terminations. The Multilink family of ra
2U 48 Ports Rack Mount Fiber Termination Boxes[Manufacturer/Exporter] Black rack mount front access patch and splice enclosure with an integrated swing out tray for accessing connectors and splices. Supports up to 2 Standard MultiLiteTM Adapter Panels with 6, 8 or 12 fiber terminations. R The Multilink family of rack
Fiber Optic Rack Mount Patch Pnels[Manufacturer/Exporter] Rack Mount Fiber Enclosure Fully enclosed and rack mount enclosure. Available in: 12 port and 24 port. Equipped with cable management and cable routing accessories to limit bend radius and add strain relief. Removable top panel. WxDxH (in): 19x8.3x1
19 Inch Fiber Optic Plastic Panels[Manufacturer/Exporter] 19'' FO Plastic Patch Panels (PPP) The modularly designed PPP is a reasonably priced solution for 19" installations. While it is light in weight, it is very robust. The assemblies designed for installation in the PPP (tray, front modules) can be
24 Port Rack Mount Fiber optic Enclosure[Manufacturer/Exporter] Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass
German Style Rack Mount Fiber Enclosure[Manufacturer/Exporter] The new fiber optic enclosures have been designed with added features to improve security, durability, ease of use and to allow maximum performance. For added security, the rear cover has been enhanced to limit rear access from anyone other than the
fiber optic patch cable[Manufacturer/Exporter] china fiber optic patch cord,china fiber optic patch cable,fiber optic patch cord manufacturer,fiber optic patch cable manufacturer,ST ST Single Mode Duplex Fiber Optic Cable 9/125,ST-ST SingleMode Duplex Fiber Optic Patch cord 9/125 china manufactur
Optical Fiber Cable,Fiber Optic Cable[Manufacturer/Exporter] Aerial Conduit Optical Cable - GYDXTW Fiber Optic Cable [Manufacturer/Exporter] Aerial Conduit Optical Cable - GYDXTW Fiber Optic Cable Aerial Conduit Ribbon Optical Cable - GYDTS [Manufacturer/Exporter] Aerial Conduit Ribbon Optical Cable - GYDTS C
Main Distribution Frame 1380-1400 Pair[Manufacturer/Exporter] Specifications: 1).Designed For Krone related modules 2).It can directly accommodate LSA-PLUS and LSA PROFIL modules 3).The installation width for the modules is 95 mm but the rack can easily be refitted for 75 mm (8-pair modules) 4). Cap
Main Distribution Frame Two Side Frame[Manufacturer/Exporter] F1C 5 6000(12005) 5760(6409) 3000 1250 1250( ) F2C 5 5000(10005) 5120(6408) 2600 1250 1250(含护栏) F3C 5 4000(8005) 3840(6406) 2200 1250 1000(无护栏) F4C 5 3000(6005) 3200(6405) 1800 1250 1000(无护栏) F1B 4 4800(12004) 4608(5129) 3000 1000 1250(含护
Termination Block For Main Distribution Frame[Manufacturer/Exporter] 1107 CWMDF690 (690Pair700PairMainDistributionFrames) Main Distribution Frame Order 982 CWMDF800 (MainDistributionFrame800Pairs) Main Distribution Frame Order 810 CW1035 (2PoleProtectionMagazine) Main Distribution Frame Order 761 CW6002-PRS (SinglePa
Protection Terminal Block For Main Distribution Frame[Manufacturer/Exporter] 1107 CWMDF690 (690Pair700PairMainDistributionFrames) Main Distribution Frame Order 982 CWMDF800 (MainDistributionFrame800Pairs) Main Distribution Frame Order 810 CW1035 (2PoleProtectionMagazine) Main Distribution Frame Order 761 CW6002-PRS (SinglePa
Single Pair Protector For Main Distribution Frame[Manufacturer/Exporter] Specifications: Provide over-voltage and over-currency protection for Main distribution Frame Of CW6002-PR
2 Pole Protection Magazine[Manufacturer/Exporter] 1107 CWMDF690 (690Pair700PairMainDistributionFrames) Main Distribution Frame Order 982 CWMDF800 (MainDistributionFrame800Pairs) Main Distribution Frame Order 810 CW1035 (2PoleProtectionMagazine) Main Distribution Frame Order 761 CW6002-PRS (SinglePa
Main Distribution Frame 800 Pairs[Manufacturer/Exporter] CW Profile Frame 800 Pair ,CW 7081 1 001-13 Main Distribution Frames 800 Pairs Floor Standing Allows Mounting Of 80 Modules(800 Pairs) Jumper Rings For Vertical and Horizontal Flat Packed Two Part Unit Easy Assembly
690 Pair 700 Pair Main Distribution Frames[Manufacturer/Exporter] Single Side Main Distribution Frames 1 Vertical Back Mount Frame Installed Capacity:690 Pair/Standard--Could Be Up To 700 Pair Assembling Structure/Saving your Shipping Costs This is Products of Cheerwe Telecom,Copper Connectivity Solutio
100 Pair MDF Terminal Blocks(K-Type)[Manufacturer/Exporter] Features: 1) 100-pair terminal blocks, Item Number:7100-100 terminal blocks, compatible 2) Normally used in main data frame
100 Pair MDF Terminal Block(SI-Type)[Manufacturer/Exporter] Features: 1)Quick Clip Connection Method 2)High contact reliability 3)Space saving due to smaller termination equipment 4)Modular designed,easy to construct Specifications: Main Distribution Frame(MDF Terminal Block) Designed for telecommuni
50 Pair MDF Terminal Block(K-Type)[Manufacturer/Exporter] 1)5-element,vertical installation,for overvoltage protection 2)10 disconnection contact insert(5 Pair a,b)with overvoltage contact 3)21 wire guide inserts for 5 pair 4)10 cover and designation strips,printed from 1 to 50 5)1 label holder,complete
5 Pair Fuse For MDF Terminal Block(K-Type)[Manufacturer/Exporter] Fuse for 7100-100 terminal blocks Designed For 100 Pair MDF Terminal Block. Krone Type and Siemens Type

50 pair distribution box

Insertion Tools for MDF Terminal Block[Manufacturer/Exporter] Insertion Tools For 100 Pair MDF Terminal Block 1 Pair Subscriber Terminal Block(Drop Wire Connection Module[Manufacturer/Exporter] 1 pair drop wire connection module without protection ( Subscriber terminal block) 1 Pair Drop Wire Connection Module With Arrester(STB Module)[Manufacturer/Exporter] pair drop wire connection module with protection ( Subscriber terminal block) 2 Pair DP Box For Subscriber Terminal Blocks(Drop Wire Modul[Manufacturer/Exporter] Distribution box designed for STB module.(One pair drop wire module) STB module with arrester or without arrester 2 Pair Drop Wire Module Distribution Box[Manufacturer/Exporter] 2 Pair STB module Distribution Box. Designed for STB module(Drop Wire Module) Module With Arrester Or Without Arreser 2 Pair Distribution Box For STB Module[Manufacturer/Exporter] Distribution box designed for STB module.(One pair drop wire module) STB module with arrester or without arrester. 5 Pair Distribution Box For Drop Wire Module[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement 10 Pair DP Box For Subscriber Terminal Blocks(Box)[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement 10 Pair DP Box For Subscriber Terminal Blocks(Box)[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement 10 Pair Distribution Box For STB Module[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement 6-12 Pair Distribution Box For STB Module[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement 25 Pair STUB Module[Manufacturer/Exporter] Assemble cables. Similar usage as STB Module. Also can be designed as 5 pair and 15 pair. 1 Pair Distribution Box For STB Module[Manufacturer/Exporter] 1)The Subscriber Connector Unit consists of a rectangular box base with a cover and a five-pole connection modules secured to the base 2)The top and base are hinged together,and the top is easily removable to facilitate working in cramped conditions 1 Pair Distribution Box For STB Module(Center Lock)[Manufacturer/Exporter] 1)The Subscriber Connector Unit consists of a rectangular box base with a cover and a five-pole connection modules secured to the base 2)The top and base are hinged together,and the top is easily removable to facilitate working in cramped conditions Subscriber Terminal In Line,Subscriber Terminal In Line Modu[Manufacturer/Exporter] The Terminal Blocks are Supplied as Independent Unit for the subscriber terminal lines,connecting telephone line and Central Office Copper management System,It could be installed on the wall mount box,Cabinet(Cross Connection Cabinet) 10 Pair Distribution Box For Krone Module[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type) 20 Pair Distribution Box For[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type) 30 Pair Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type) 30,50 Pair Distribution Box[Manufacturer/Exporter] 1).This Box could install 30,40 and 50 pair back mount frame. 2).Screw locking type and key locking type all are available. 3)Material:ABS 4).Dimension:180*170*75mm 10 Pair Indoor Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type) 20 Pair Indoor Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type) 30 Pair Indoor Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type) 50 Pair Distribution Box[Manufacturer/Exporter] 1).This Box could install 30,40 and 50 pair back mount frame. 2).Screw locking type and key locking type all are available. 3)Material:ABS 4).Dimension:190*205*105mm 100 Pair Distribution Box[Manufacturer/Exporter] 1).This Box could install 30,40,50,60,70 to 100 pair back mount frame. 2).Screw locking type and key locking type all are available. 3)Material:ABS 4).Dimension:275*205*105mm New 30 Pair Distribution Box[Manufacturer/Exporter] 1)Designed For Krone LSA Module,Connection Module&Disconnection Module. 2)Install 30 Pair Back Mount Frame. 3)Material:ABS 4).Dimension:171mm*140mm*75mm 5).It could be installed additional parts to enlarge the height,under this condition,you coul Attached Frame&Flash Mounting Frame For DP Box[Manufacturer/Exporter] 1).Description Weight/Pack Pack Attachment frame 0.130 kg 1 piece for increasing the installation depth by 37 mm for overvoltage protection applications 2)Item Number:6436 3 003-20 3)Designed For Krone Indoor Box(Kronection Box-I)20,30 Pair New 50 Pair Distribution Box[Manufacturer/Exporter] 1)Designed For Krone LSA Module,Connection Module&Disconnection Module. 2)Install 30,40,50 Pair Back Mount Frame. 3)Material:ABS 4).Dimension:209mm*209mm*75mm 5).It could be installed additional parts to enlarge the height,under this condition,yo

50 pair distribution box

Insertion Tools for MDF Terminal Block[Manufacturer/Exporter] Insertion Tools For 100 Pair MDF Terminal Block
1 Pair Subscriber Terminal Block(Drop Wire Connection Module[Manufacturer/Exporter] 1 pair drop wire connection module without protection ( Subscriber terminal block)
1 Pair Drop Wire Connection Module With Arrester(STB Module)[Manufacturer/Exporter] pair drop wire connection module with protection ( Subscriber terminal block)
2 Pair DP Box For Subscriber Terminal Blocks(Drop Wire Modul[Manufacturer/Exporter] Distribution box designed for STB module.(One pair drop wire module) STB module with arrester or without arrester
2 Pair Drop Wire Module Distribution Box[Manufacturer/Exporter] 2 Pair STB module Distribution Box. Designed for STB module(Drop Wire Module) Module With Arrester Or Without Arreser
2 Pair Distribution Box For STB Module[Manufacturer/Exporter] Distribution box designed for STB module.(One pair drop wire module) STB module with arrester or without arrester.
5 Pair Distribution Box For Drop Wire Module[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement
10 Pair DP Box For Subscriber Terminal Blocks(Box)[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement
10 Pair DP Box For Subscriber Terminal Blocks(Box)[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement
10 Pair Distribution Box For STB Module[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement
6-12 Pair Distribution Box For STB Module[Manufacturer/Exporter] Features :- * Protection & connection solutions for joining buried subscriber wires & drop wires. * Excellent weather resistance. * Protection of IP 54 according to IEC 60529. * Quick, secure and reliable connection * Insulation Displacement
25 Pair STUB Module[Manufacturer/Exporter] Assemble cables. Similar usage as STB Module. Also can be designed as 5 pair and 15 pair.
1 Pair Distribution Box For STB Module[Manufacturer/Exporter] 1)The Subscriber Connector Unit consists of a rectangular box base with a cover and a five-pole connection modules secured to the base 2)The top and base are hinged together,and the top is easily removable to facilitate working in cramped conditions
1 Pair Distribution Box For STB Module(Center Lock)[Manufacturer/Exporter] 1)The Subscriber Connector Unit consists of a rectangular box base with a cover and a five-pole connection modules secured to the base 2)The top and base are hinged together,and the top is easily removable to facilitate working in cramped conditions
Subscriber Terminal In Line,Subscriber Terminal In Line Modu[Manufacturer/Exporter] The Terminal Blocks are Supplied as Independent Unit for the subscriber terminal lines,connecting telephone line and Central Office Copper management System,It could be installed on the wall mount box,Cabinet(Cross Connection Cabinet)
10 Pair Distribution Box For Krone Module[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type)
20 Pair Distribution Box For[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type)
30 Pair Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type)
30,50 Pair Distribution Box[Manufacturer/Exporter] 1).This Box could install 30,40 and 50 pair back mount frame. 2).Screw locking type and key locking type all are available. 3)Material:ABS 4).Dimension:180*170*75mm
10 Pair Indoor Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type)
20 Pair Indoor Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type)
30 Pair Indoor Distribution Box[Manufacturer/Exporter] Features: 1) These are 3 types of distribution boxes: 10 pair, 20 pair, 30 pair 2) Item number for these are (from left to right): a) WT-1061: 10 pair distribution box (snap locking type) b) WT-1062: 20 pair distribution box (screw locking type)
50 Pair Distribution Box[Manufacturer/Exporter] 1).This Box could install 30,40 and 50 pair back mount frame. 2).Screw locking type and key locking type all are available. 3)Material:ABS 4).Dimension:190*205*105mm
100 Pair Distribution Box[Manufacturer/Exporter] 1).This Box could install 30,40,50,60,70 to 100 pair back mount frame. 2).Screw locking type and key locking type all are available. 3)Material:ABS 4).Dimension:275*205*105mm
New 30 Pair Distribution Box[Manufacturer/Exporter] 1)Designed For Krone LSA Module,Connection Module&Disconnection Module. 2)Install 30 Pair Back Mount Frame. 3)Material:ABS 4).Dimension:171mm*140mm*75mm 5).It could be installed additional parts to enlarge the height,under this condition,you coul
Attached Frame&Flash Mounting Frame For DP Box[Manufacturer/Exporter] 1).Description Weight/Pack Pack Attachment frame 0.130 kg 1 piece for increasing the installation depth by 37 mm for overvoltage protection applications 2)Item Number:6436 3 003-20 3)Designed For Krone Indoor Box(Kronection Box-I)20,30 Pair
New 50 Pair Distribution Box[Manufacturer/Exporter] 1)Designed For Krone LSA Module,Connection Module&Disconnection Module. 2)Install 30,40,50 Pair Back Mount Frame. 3)Material:ABS 4).Dimension:209mm*209mm*75mm 5).It could be installed additional parts to enlarge the height,under this condition,yo

disconnection module and Distribution Box

Attached Frame&Flash Mounting Frame For 50 Pair DP Box[Manufacturer/Exporter] 1).Description Weight/Pack Pack Attachment frame 0.130 kg 1 piece for increasing the installation depth by 37 mm for overvoltage protection applications 2)Item Number:6436 3 003-50 3)Designed For Krone Indoor Box(Kronection Box-I)30,50 Pair
New 100 Pair Distribution Box[Manufacturer/Exporter] 1) Suitable for various enviroment condition(both indoor and outdoor) 2) Embedded chart and logo position make it easy to identify 3) Frame could be changed for your wish.such as 30 pair,40 pair,50 pair.All available! 4) OEM products 5) Material
Attached Frame&Flash Mounting Frame For 100 Pair DP Box[Manufacturer/Exporter] 1).Description Weight/Pack Pack Attachment frame 0.130 kg 1 piece for increasing the installation depth by 37 mm for overvoltage protection applications 2)Item Number:6436 3 003-100 3)Designed For Krone Indoor Box(Kronection Box-I)100 Pair
30 Pair Distribution Box[Manufacturer/Exporter] Features: 1) Suitable for various enviroment condition(both indoor and outdoor) 2) Embedded chart and logo position make it easy to identify 3) Frame could be changed for your wish.such as 30 pair,40 pair,50 pair.All available! 4) OEM products
30 Pair Outdoor Distribution Box[Manufacturer/Exporter] Features: 1) 10, 20, 30, 50, 100-pair distribution box 2) Compatible with LSA IDC module and subscriber terminal block 3) 50-pair distribution box for outdoor, screw / key locking type 4) Dimensions: 30-pair: 180 x 170 x 75mm 5) Material: ABS
50 Pair Outdoor Distribution Box[Manufacturer/Exporter] Features: 1) 10, 20, 30, 50, 100-pair distribution box 2) Compatible with LSA IDC module and subscriber terminal block 3) 50-pair distribution box for outdoor, screw / key locking type 4) Dimensions: 30-pair: 180 x 170 x 75mm 5) Material: ABS
100 Pair Outdoor Distribution Box[Manufacturer/Exporter] 1) 1 pair, 4 pair, 6 pair, 8 pair, 10 pair etc.different type of distribution box 2) Designed for Connection&Disconnection module. 3) Outdoor design for different enviroment.
100 Pair Distribution Box[Manufacturer/Exporter] We provide differnt type of distribution box for module(Connection&Disconnection Module) We have different design for distribution box. See more details in our website
New Type 100 Pair Indoor Distribution Box[Manufacturer/Exporter] 1) Suitable for various enviroment condition(both indoor and outdoor) 2) Embedded chart and logo position make it easy to identify 3) Frame could be changed for your wish.such as 30 pair,40 pair,50 pair.All available! 4) OEM products 5) Material
100 Pair Metal Distribution Box[Manufacturer/Exporter] 1).100 Pair Distribution Designed For Krone LSA PLUS Module 2).Plastic Mounting Adaptor and Steel Frame Box Parts 3).100 Ways or 110 Ways of Back Mount Frame 4).Easy For Installation
20 Pair Metal Distribution Box For Profile Module[Manufacturer/Exporter] )Designed For Krone Style LSA Profile Module. 2)Easy Installation For 1 Pair,2 Pair Krone LSA Earth Module 3)Key Locking Type. 4)All Steel Material
50 Pair Indoor Screw Distribution Box[Manufacturer/Exporter] See Related Products Below Krone Module,LSA PLUS Disconnection Module,LSA Profile Module,LSA Earth Bar,Test Plugs and Related Accessories
10 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Disconnection Module[Manufacturer/Exporter] Normally used in telecom field, and compatible disconnection module Features: 1) Parallel tap 2) Front measuring and testing connection modules have a 1-piece contact providing continuous link between permanent wiring and jumper wiring 3) Over-
10 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Disconnection Module Label Attached[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
8 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
5 Pair Disconnection Module[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Profile Module Disconnection Type[Manufacturer/Exporter] 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are available
10 Pair Profile Connection Module With Full Grey Color[Manufacturer/Exporter] Material:PBT or ABS Color:Full Grey Color
10 Pair Earth Module With Grey Base and Crimson Body[Manufacturer/Exporter] Normally used in telecom field, and compatible disconnection module Features: 1) Parallel tap 2) Front measuring and testing connection modules have a 1-piece contact providing continuous link between permanent wiring and jumper wiring 3) Over-
10 Pair Profile Earth Module With Grey Base and Crimson Body[Manufacturer/Exporter] Material:PBT or ABS Color:Grey Base with Crimson Body
10 Pair Switching Module With Grey Base and Crimson Body[Manufacturer/Exporter] Switching Module: Normally open contact on the front for serial insertion of protection plugs and for measuring and testing. switching modules have two piece contacts normally open to allow connection by one the KRONE range of pole bridging plugs, te
10 Pair Profile Switching Module With Grey Base and Crimson [Manufacturer/Exporter] Switching Module: Normally open contact on the front for serial insertion of protection plugs and for measuring and testing. switching modules have two piece contacts normally open to allow connection by one the KRONE range of pole bridging plugs, te

Sunday, March 22, 2009

Telecom and GPS Products Buy Directly from china

Telecom Product Directory,telecom product catalog,telecom products,telecom product sources from China Suppliers and manufacturers - sitemap:
archives
member
China Cable Manufacturer solenoid-valves-manufacturer
supplier
Caller ID Radar & Assembly Radio & TV Broadcasting Related Products Microwave/Wireless Component Network Communications Cat5e/Cat6 Premise Cabling Phone Cards Switchboard Telecom Parts 110 Wiring Block System Main Distribution Frame MDF Terminal Blocks Network RJ45 FacePlate Optical Distribution Frame Patch Panel RJ45 Modules Premises Cabling Subscriber Terminal Block Telcommunication Cabinet Telecom Liquid Tight Conduit Telecom Products Mould Telephone Accessories Insertion an.d Crimping Tool Gas Tube Arrester FTTH Solutions Accessaries For Module ADSL Splitter,ADSL Filter Central Office Fiber Solutions Coaxial Cable Connector Computer Adapter DVI,VGA,DB9 Copper Cable Closure Copper Cables,OSP Fiber Cables Digital Distribution Frame Disconnection Module Distribution Box Fiber Optic Distribution USA Style Telecom Products Telephones Parts Explosion Proof Phone Telephone USB Skype Phone WeatherProof Phone Video Phones & Parts Wireless Communication Wireless Networking Equipment Mobile Phones, Accessories Par Lithium Batteries Mobile Phone Accessories Mobile Phone Batteries Mobile Phone Parts Nickel Hydride Batteries Mobile Phones CDMA Mobile Phone GSM Mobile Phone Mobile Phone Mobile Phone Parts Communication Cables Cat5e/Cat6 LAN cable Coaxial Cable Optical Fiber Cable Telephone Cable Exchanges Fast Ethernet Switch Fiber Optic Transmission Gigabit Local LAN Fax Machines Fiber Optic Equipment GPS GPS Navigator Interphones Lithium Batteries, Nickel Hydr Mobile Phone Accessories Wireless Phone/Radio & System VOIP Solution
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50